Home  /  Government Contract Financing  /  Types

Types of Government Contract Financing (Explained)

The types of government contract financing fall into two families. The first is provided by the government itself under FAR Part 32: progress payments, performance-based payments, commercial financing, advance payments and guaranteed loans, all written into the contract and interest-free. The second is provided by lenders and factors against the contract: factoring, receivables lines, contract-backed lines, mobilization funding, purchase order financing and SBA loans. This page is the map for the government contract financing hub.

Written by Select Loan Advisors editorial teamLast reviewed 2026-09-15Editorial policy

One rule shapes the list. FAR 32.106 tells contracting officers to prefer, in order: private financing without government guarantee, customary contract financing, loan guarantees, unusual contract financing, and last, advance payments. The government provides its own financing only "to the extent actually needed for prompt and efficient performance" (FAR 32.104).

Amounts, rates and terms shown are illustrative examples, not an offer or a quote. Select Loan Advisors is not a lender; funding partners set all terms. See how we're compensated.

All types of government contract financing in one table

Type Provided by Typical amount Illustrative cost Speed Best for
Progress payments (FAR 32.5) Government 80% of costs; 85% for small businesses 0% Monthly requests, paid within 30 days Supply and production contracts with 4+ months before first billing
Performance-based payments (FAR 32.10) Government Up to 90% of contract price 0% Per event, paid within 30 days Fixed-price contracts with definable milestones
Commercial financing (FAR 32.2) Government Advances capped at 15% of price before performance; interim payments as negotiated 0% As the contract sets Commercial products and services
Advance payments (FAR 32.4) Government Interim cash needs only Least preferred Weeks; agency approval Rare
Guaranteed loans (FAR 32.3) Lender, guaranteed by a defense agency Case by case Lender rate Slow Defense production only
Government contract factoring Factor 80% to 95% of each invoice 1% to 3% per 30 days 24 to 48 hours per invoice after setup Fast cash on accepted invoices; new or weak credit
Receivables financing Bank or specialty lender 70% to 90% of eligible AR Bank: Prime + 1.75% to 9.75%; online 10% to 99% APR 1 to 6 weeks Steady monthly billers with clean books
Contract-backed line of credit Bank or specialty lender Sized to the cash deficit, $30K to $5M Same range as receivables lines 2 to 6 weeks Payroll between award and first invoice
Mobilization funding Specialty lender First 30 to 60 days of costs Factor rates roughly 1.1 to 1.5 1 to 2 weeks New awards with heavy up-front costs
Purchase order financing PO lender Supplier invoice At or above factoring pricing 1 to 2 weeks Resellers of finished goods
SBA Contract CAPLine, 7(a), Express SBA-guaranteed lender Up to $5,000,000; Express to $500,000 Variable ceilings 9.75% to 13.25% at 6.75% prime, plus guaranty fee 60 to 90 days Established contractors who can plan ahead
General credit (bank line, term loan, equipment) Bank or online lender $10K to $5M Bank 8.50% to 16.50%; one large online lender reports a 59.8% average APR Days to weeks Bank-grade credit, or needs unrelated to the contract

Private ranges come from lender disclosures and are directional, not quotes.

Family one: financing the government provides (FAR Part 32)

These are not loans. They are payments the agency makes before delivery, later liquidated from delivery invoices. FAR 32.113 defines the customary forms.

Progress payments (Subpart 32.5). A percentage of costs incurred on fixed-price contracts: "80 percent, applicable to the total costs of performing the contract," and "85 percent" for small businesses (FAR 32.501-1). A small business qualifies when the contract exceeds the simplified acquisition threshold and first billing is normally 4 months or more away (FAR 32.104). The trade-off is liquidation: the agency deducts the same percentage from early delivery invoices. Our guide to federal progress payments walks through the math.

Performance-based payments (Subpart 32.10). Tied to events rather than costs, "the preferred Government financing method when the contracting officer finds them practical" (FAR 32.1001); totals "shall not exceed 90 percent of the contract price" (FAR 32.1004). A contract carries progress payments or performance-based payments, never both (FAR 32.1003).

Commercial product and service financing (Subpart 32.2). Interim or advance payments where that is "customary in the commercial marketplace"; advances before performance cannot exceed 15 percent of the contract price (FAR 32.202-1).

Advance payments (Subpart 32.4). Cash before any work, secured and approved on a written finding. FAR calls this "the least preferred method of contract financing" (FAR 32.402). Do not plan on it.

Guaranteed loans (Subpart 32.3). A private loan guaranteed by a designated agency under the Defense Production Act, with Federal Reserve Banks as fiscal agents (FAR 32.302). Defense production only.

Government financing payments are due on the 30th day after a proper request but earn no Prompt Payment interest if late (FAR 32.007). And the contracting officer "shall not treat the contractor's need for contract financing as a handicap for a contract award" (FAR 32.107).

Family two: financing lenders provide against the contract

Every contract-secured product rests on one legal mechanism: an assignment of the contract's payments to the lender under the assignment of claims act (31 U.S.C. § 3727, 41 U.S.C. § 6305, FAR 32.802). Payments must aggregate $1,000 or more, the assignee must be a financing institution, and written notice goes to the contracting officer, surety and disbursing officer. Once acknowledged, the agency pays the lender.

Government contract factoring. You sell accepted invoices; the factor advances most of the face value within a day or two and collects from the agency under the prompt payment act, which requires payment 30 days after a proper invoice (5 CFR 1315.4). It underwrites the agency, not you, which is why first-year contractors can use it.

Contract-backed line of credit. Sized to the cash deficit in your forecast, including payroll before the first invoice exists: the pre-invoice gap factoring cannot reach.

SBA-guaranteed loans. The Contract CAPLine finances "the costs of one or more specific contracts, including overhead or general and administrative expenses, allocable to the specific contract(s)" (SBA types of 7(a) loans), up to $5,000,000 for up to 10 years (13 CFR 120.390). Ceilings sit at base plus 3.0% above $350,000, or 9.75% at 6.75% prime (SBA 7(a) terms).

General business credit. Bank lines, term loans and equipment financing underwrite you, not the contract. See the funding options hub.

Worked example: one payroll gap, three types

A services firm wins a $960,000 twelve-month contract billed monthly at $80,000; weekly payroll is $14,000. The agency pays 30 days after a proper invoice, but acceptance and one correction push the first payment to day 75. Ten payrolls, $140,000, go out first, and about $100,000 of payroll stays ahead of collections all year.

Type What it covers Illustrative cost for the year
Progress payments at 85% of costs (if the contract carries FAR 52.232-16) 85% of monthly costs, requested as incurred $0
Contract-backed line at Prime + 5.25% (12.00%) The whole gap, including the first ten payrolls $100,000 × 12% = $12,000 plus origination
Factoring at 90% advance, 1.75% per 30 days $72,000 per invoice within 48 hours; not the first ten payrolls 45-day fee 2.625% × $960,000 = $25,200

Without a financing clause, the line fits a pre-invoice gap; factoring wins when speed or credit is the constraint.

The rules that matter

  • FAR Part 32. Subparts 32.2, 32.4, 32.5 and 32.10 define government financing; 32.106 sets the order of preference; 32.107 bars treating need for financing as a handicap.
  • Assignment of Claims (31 U.S.C. § 3727; 41 U.S.C. § 6305; FAR 32.8). Required for every contract-secured private product.
  • Prompt Payment (5 CFR 1315). Thirty days from a proper invoice, 7 days to return an improper one, automatic interest at 4.75% for July 1 through December 31, 2026 (Treasury Fiscal Service).
  • SBA CAPLines (13 CFR 120.390). Four lines under 7(a) with the standard 7(a) maximum and guarantee.

Prime vs subcontractor

Government financing and the Assignment of Claims run to the prime only. A prime may include financing payments to subcontractors in its own progress payment request (FAR 52.232-16), but a subcontractor cannot assign the government's payment. Sub financing is underwritten on the prime's credit and the subcontract's payment clause; on construction, the prime must pay subs within 7 days of being paid (FAR 52.232-27).

Who this is not for

  • Contractors without a signed, funded award. Until award, only general credit is available, priced on you alone; see what lenders require.
  • Contracts that carry FAR 32.5 or 32.10 financing. Use the free money first and size private financing to what liquidation leaves.
  • Thin-margin contracts. Factoring at 2.6% of revenue on a 9% gross margin consumes nearly a third of the profit.
  • Contractors reaching for a merchant cash advance. A daily-debit advance on an assignable federal receivable pays 40% to 350% APR-equivalent for what a factor does at a fraction of the cost.

Sources

Common questions

What are the types of government contract financing?

Two families. Government-provided financing under FAR Part 32: progress payments (32.5), performance-based payments (32.10), commercial financing (32.2), advance payments (32.4) and guaranteed loans (32.3). Lender-provided financing secured by the contract: factoring, receivables financing, contract-backed lines, mobilization funding, purchase order financing and SBA Contract CAPLines, all relying on an Assignment of Claims. General business credit is a contract-independent third option.

What is the difference between progress payments and performance-based payments?

Progress payments are based on costs incurred, at 80 percent, or 85 percent for small businesses, under FAR 32.501-1. Performance-based payments are based on completing defined events, capped at 90 percent of the contract price under FAR 32.1004. A contract uses one or the other, and both are liquidated from delivery payments.

Does the government prefer to provide financing or have contractors borrow privately?

Private financing comes first. FAR 32.106 lists the order of preference as private financing without government guarantee, then customary contract financing, loan guarantees, unusual contract financing, and finally advance payments. FAR 32.104 limits government financing to what is actually needed for prompt and efficient performance.

Which type of government contract financing is cheapest?

Government-provided progress and performance-based payments cost nothing. Among private options, SBA CAPLines have the lowest ceilings, base plus 3.0 percent above $350,000, or 9.75 percent at the current 6.75 percent prime, plus a guaranty fee. Bank receivables lines come next, then factoring, then online credit. All private figures are illustrative.

Can I combine types?

Often, yes. A contract with progress payments can still carry a private line for the unfinanced 15 to 20 percent and for liquidation gaps, with the lender taking an assignment as security. Factoring and a mobilization advance are commonly paired. You cannot combine progress and performance-based payments on one contract, or assign one contract to two lenders.

Find out where you stand

Send us the award value, billing schedule and first invoice date. We identify which government financing the contract already carries, size private financing to the remaining gap, and say plainly when a product is wrong for the margin. Read how business loan brokers work and how do business loan brokers get paid, then

Check My Options →
Soft credit pull to review options. Select Loan Advisors is not a lender.